Seat -BGM Longtail- Lambretta LI, LI S, SX, TV, DL, GP - with magnet snapper

Shapely sports seat that combines the Ancilotti and Slope style with each other.
Suitable for Lambrettas series 1-3, Li, LiS, SX, TV, DL, GP.
A long stitched seat, gray piping and a harmonious insertion into the vehicle silhouette make the BGM Longtail a real eye-catcher.

Assembly instructions for BGM Longtail Lambretta seat :

- Please dismantle the old seat, the air scoop (Airscoop) and the seat support plate first.

- Remove the hinge plate of the BGM Longtail seat from the seat.
- Fit two nuts to the two fastening screws.
- Thread the hinging plate of the BGM Longtail bench into the holes of the fastening screws.
- Insert the fastening screws together with the hinged plate through the front mounting points in the frame and preassemble loosely using nuts
.
- Now reconnect the BGM Longtail seat to the hinged plate (end tight).
- The air gap between the seat and the frame can now be adjusted using the adjusting nuts to prevent contact damage when folding up to
.
- Mount the fastening screws end tight.

- Since the BGM Longtail seat does not have any mechanical locking device at the rear of the frame, but is held in position by a very strong magnet, it is recommended to provide the contact point to the magnet on the vehicle frame with a sticker, for example, to protect the valuable paint.